You must have javascript enabled to use bicyclesi.com !

Garmin Bike Cadence Sensor 2 | Bluetooth | ANT+ | Sensor to Monitor

Pedaling

USD $67.46

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Sporting Goods / Cycling / Bicycle Electronics / Cycle Computers & GPS

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Skip to main content Garmin Bike Cadence Sensor 2

Wireless crank-arm cadence sensor — measures pedal strokes per minute and transmits live RPM data to compatible Garmin devices, training apps, and fitness displays. No magnets. No exposed parts to align. Attaches in seconds with rubber bands to any size crank arm. ANT+ and Bluetooth Low Energy in a single sensor. Up to 12 months of battery life on a single CR2032. MPN: 010-12844-00. UPC: 753759222543.

ANT+ & Bluetooth LE No Magnets Required Any Size Crank Arm 12-Month Battery Life Zwift Compatible Garmin Connect Up to 2 BLE Devices 1-Year Warranty 2Protocols
ANT+ & BLE 12moBattery life AnyCrank arm size 2BLE devices
simultaneously ★★★★★ Easy to install on my Dura Ace crank arm and my Garmin 130 acknowledged it immediately. Light weight and hardly intrusive.

— Verified Customer via Heart Rate Monitors USA

Our Take: The Cadence Sensor 2 is Garmin's dual-protocol cadence sensor — the upgrade that made these sensors genuinely universal. Earlier Garmin cadence sensors transmitted on ANT+ only, which meant they couldn't talk to smartphones, Apple TV, or third-party training apps directly. The Sensor 2 adds Bluetooth Low Energy alongside ANT+, so it broadcasts on both protocols simultaneously. Pair it to your Edge or Forerunner via ANT+ and to Zwift on an iPad via Bluetooth at the same time — both receive live cadence data from the same sensor with no switching required. Installation is the other headline: there are no magnets, no sensor arms to adjust, and no wheel reflectors to align. Wrap a rubber band around your crank arm, clip the sensor onto it, and rotate the crank twice to wake it up. That's the entire installation. The sensor attaches to the non-drive-side crank arm (left side on most bikes), works with any crank arm size, and uses rubber bands that are durable enough to stay put through rain and hard efforts. The form factor is small and sits flush against the arm with 8.18mm clearance required — enough for the vast majority of bikes including most triathlon frames. Battery life is approximately 12 months at one hour per day, using a CR2032 coin cell that's user-replaceable. The LED flashes green to confirm activity after two crank revolutions and red when the battery is low. Data goes to Garmin Connect for long-term cadence tracking, and from there to Strava or Training Peaks automatically. Cadence data is also available to compatible third-party apps via Bluetooth — Zwift, and any other app that accepts Bluetooth cadence input.

ANT+ and Bluetooth LE — Simultaneously

The Cadence Sensor 2 pairs with up to 2 Bluetooth devices and an unlimited number of ANT+ devices at the same time. Pair to a Garmin head unit via ANT+ and to Zwift, compatible training apps, or Apple TV via Bluetooth — both receive live cadence without reconnecting or switching modes.

Why you'd choose this sensor
  • ANT+ and Bluetooth LE — both protocols, simultaneously Transmits on ANT+ and Bluetooth Low Energy at the same time. Pair to your Garmin cycling computer or running watch via ANT+ and to a smartphone app or Apple TV via Bluetooth — one sensor, two connections, live data on both simultaneously.
  • No magnets — attaches to any crank arm size Magnetless design requires no alignment, no wheel magnet to position, and no sensor arm to adjust. Attach with the included rubber bands to any crank arm size — road, gravel, mountain, triathlon, compact, or standard. Move between bikes in seconds.
  • Zwift, compatible training apps & third-party app support Bluetooth LE means the Cadence Sensor 2 works natively with Zwift, and virtually any training app that accepts Bluetooth cadence input. Critical for indoor training setups where your phone, tablet, or Apple TV is the primary display.
  • Up to 2 Bluetooth devices paired simultaneously Pair to two Bluetooth devices at once — for example, Zwift on an iPad and Garmin Connect on a phone — while also broadcasting to ANT+ devices. No need to unpair or switch between sessions.
  • 12-month battery life — user-replaceable CR2032 Approximately 12 months at one hour per day of use. The CR2032 coin cell is user-replaceable without tools. The LED flashes red to warn you before the battery dies, giving you time to replace it before a ride.
  • Auto-wake — 2 crank revolutions to activate The sensor sleeps between rides to conserve battery. Rotating the crank arm two revolutions wakes it automatically — it then broadcasts to paired devices within range. No buttons to press before a ride.
  • Works indoors and outdoors ANT+ and Bluetooth LE both work indoors, making the Cadence Sensor 2 ideal for smart trainers, rollers, and stationary bike setups where GPS isn't available. Cadence data flows to your head unit, phone, tablet, or Apple TV regardless of location.
  • Garmin Connect integration — cadence history and analytics Cadence data syncs to Garmin Connect after every ride, building a historical record of your pedaling efficiency. From Garmin Connect, data auto-syncs to Strava, TrainingPeaks, and other connected apps. Use long-term cadence data to track improvements in pedaling efficiency.

Tip: Tab to a reason and press Enter to expand the explanation. Press Escape to close.

Perfect For
  • Cyclists who want to add cadence data to an existing Garmin setup — Edge, Forerunner, Fenix, or Venu
  • Indoor training on Zwift, compatible training apps, or any Bluetooth-compatible app
  • Riders who switch between multiple bikes and want a sensor that moves easily
  • Zwift users on Apple TV who need Bluetooth cadence without a Bluetooth-only sensor
  • Cyclists who want cadence without investing in a power meter
  • Triathletes who need a sensor that works seamlessly with Garmin multisport devices
Good to know before you buy
  • Mounting clearance: 8.18mm required between the crank arm and frame — sufficient for most bikes including most triathlon frames
  • Non-drive side only: mounts to the left crank arm
  • Cadence only: measures RPM only — does not measure speed or distance. For speed, add the Garmin Speed Sensor 2 or use GPS
  • Garmin Connect app: cannot pair as a standalone sensor — requires a compatible Garmin device or head unit
  • Two rubber band sizes included: standard and large
Product Details Key Features
  • Measures pedal strokes per minute (RPM)
  • ANT+ and Bluetooth Low Energy — simultaneously
  • Pairs with up to 2 Bluetooth devices at once
  • Unlimited ANT+ device pairings
  • No magnets — rubber band mount to any crank arm
  • Auto-wake: 2 crank arm revolutions
  • LED status: green = active, red = low battery
  • Battery: CR2032, ~12 months at 1 hr/day
  • Weight: 2.08 oz
  • Color: Black
  • 8.18mm clearance required between crank and frame
  • Non-drive-side (left crank arm) mounting
Compatible Devices & Apps
  • Garmin devices (ANT+/BLE): Edge 130/530/830/1030/1040 series, Forerunner 245/745/935/945/955/965, Fenix series, Venu series, and all ANT+/BLE-compatible Garmin devices
  • Training apps (BLE): Zwift
  • Platforms: Apple TV (Bluetooth), iPad, iPhone, Android
  • Garmin Connect: syncs after every ride for cadence history and analytics
  • Third-party sync: Strava, TrainingPeaks via Garmin Connect auto-sync
Installation
  • Place sensor on non-drive-side (left) crank arm inner face
  • Secure with included rubber band — large or small depending on crank
  • Rotate crank 2 revolutions — LED flashes green to confirm wake
  • Bring compatible device within 3m (10ft) to pair
  • Stay 10m (33ft) from other wireless sensors during initial pairing
  • Take a 15-minute test ride to confirm fit and clearance
  • No tools required
In the Box
  • Garmin Bike Cadence Sensor 2
  • Rubber mounting band (standard size)
  • Rubber mounting band (large size)
  • CR2032 battery (pre-installed)
  • Documentation
Warranty & Support
  • 1-year limited manufacturer warranty
  • Eligible for Garmin firmware updates and Garmin support
  • Sold by Heart Rate Monitors USA — Authorized Garmin Dealer
  • Questions? Contact us through eBay messaging
Cadence Sensor 2 — Full Specifications Specification Detail ModelBike Cadence Sensor 2 MPN010-12844-00 UPC753759222543 ColorBlack MeasurementPedal strokes per minute (RPM / cadence) Wireless protocolsANT+ and Bluetooth Low Energy (simultaneously) Bluetooth pairingUp to 2 Bluetooth devices simultaneously ANT+ pairingUnlimited devices MountingRubber band — non-drive-side crank arm (left side) Magnets requiredNo — magnetless design Crank arm compatibilityAny size (standard and large bands included) Clearance required8.18mm between crank arm and frame Auto-wake2 crank arm revolutions LED indicatorsGreen (5 sec) = active · Red = low battery Battery typeCR2032 (user-replaceable) Battery lifeApproximately 12 months at 1 hour/day Weight2.08 oz Compatible Garmin devicesEdge series · Forerunner series · Fenix series · Venu series · All ANT+/BLE Garmin devices Third-party app supportZwift · compatible training apps · compatible training apps · Apple TV · Any Bluetooth cadence-compatible app Garmin Connect syncYes — cadence history and analytics Warranty1-year limited CA Prop 65Warning: contains lead — wash hands after handling Frequently Asked Questions Does the Cadence Sensor 2 work with Zwift?

Yes. The Cadence Sensor 2 connects to Zwift via Bluetooth Low Energy. Zwift on iPhone, iPad, Android, Apple TV, and PC/Mac all support Bluetooth cadence input. The sensor pairs directly — no ANT+ dongle required for Bluetooth platforms. If you're running Zwift on a PC with an ANT+ USB dongle, it also works that way.

Can it pair to my Garmin watch and Zwift at the same time?

Yes. The sensor pairs to up to 2 Bluetooth devices simultaneously, and to unlimited ANT+ devices. In practice: your Garmin watch or Edge connects via ANT+, Zwift connects via Bluetooth — both receive live cadence data from the same sensor without any switching or reconnecting.

Does this sensor measure speed as well as cadence?

No. The Cadence Sensor 2 measures pedal strokes per minute (cadence / RPM) only. It does not measure wheel speed or distance. For speed and distance data, use GPS on a compatible Garmin device or add the Garmin Speed Sensor 2, which attaches to the wheel hub and self-calibrates with compatible Garmin devices.

How do I install it? Do I need tools?

No tools required. Place the sensor on the inside of your non-drive-side (left) crank arm, secure it with one of the included rubber bands — use the standard band for most crank arms or the large band for wider crank arms — then rotate the crank two revolutions to wake the sensor. Bring your Garmin device within 3 meters to complete pairing. Take a short test ride to confirm the sensor has adequate clearance and the band is seated correctly.

How long does the battery last and how do I replace it?

Approximately 12 months at one hour of daily use. The sensor uses a CR2032 coin cell battery available at most pharmacies and electronics stores. The LED flashes red to signal a low battery before it fails. Replace by opening the sensor housing — no tools required — and swapping the battery. The new battery activates automatically on the next crank rotation.

Will it fit my bike's crank arm?

The sensor fits any size crank arm using the included rubber bands. The one clearance requirement is 8.18mm of space between the crank arm and the frame or any other component. This is sufficient for the vast majority of road, gravel, mountain, and triathlon bikes. For very high-end triathlon frames with extremely tight frame clearances, verify this measurement before purchase. Garmin recommends mounting on the non-drive (left) crank arm inside face.

Is it compatible with non-Garmin devices?

Yes. Any device or app that supports the ANT+ cadence profile or Bluetooth Low Energy cadence profile can receive data from this sensor. This includes non-Garmin head units that support ANT+ (such as Wahoo ELEMNT and Karoo), and any smartphone or tablet app that supports Bluetooth cadence input. The sensor is not exclusive to Garmin hardware.

What is the difference between the Cadence Sensor 2 and the older Garmin cadence sensors?

The primary upgrade in the Cadence Sensor 2 is the addition of Bluetooth Low Energy alongside ANT+. Older Garmin cadence sensors transmitted on ANT+ only, which meant they could not connect to smartphones, Apple TV, or Bluetooth-only apps without an ANT+ bridge. The Sensor 2 broadcasts on both simultaneously, making it compatible with the full range of modern training platforms.

CA Residents: contact seller through eBay messaging for details

We work hard to keep product information accurate. If you spot an error, contact us through eBay messaging. Questions? Contact us through eBay messaging.

Garmin Bike Cadence Sensor 2 | Bluetooth | ANT+ | Sensor to Monitor Pedaling
bluetooth
See more
Price type
IN STOCK OUT STOCK